dearadh córas fuaraithe inverter
The efficiency of theinverter is generally 97 98 percent , which means that about 2 3 percent of the electric energy is transformed into heat energy, which is much greater than the heat generated by general switches, AC contactors and other electrical appliances. General distribution cabinets are designed for common switches, AC contactors and other electrical appliances. When this kind of cabinet is used for inverter, the internal components shall be arranged to ensure the rationality of ventilation and heat dissipation.
The failure rate of inverter increases exponentially with the increase of temperature, and the service life decreases exponentially with the increase of temperature. When the ambient temperature increases by 10 degrees, the average service life of theinverter is halved. When the inverter works, the current flowing through is very large, and the heat generated by the inverter is also very large. The influence caused by its heating cannot be ignored.
In the thermal design of inverter, it is based on vertical installation, and the heat dissipation will become worse when installed horizontally. The inverterfeistithe le lucht leanúna fuaraithe, ach beidh an lucht leanúna fuaraithe fós suiteáilte ag asraon aer an chomh-aireachta rialaithe, agus beidh an t-ionraon aer feistithe le scáileán scagaire chun deannach a chosc ó dhul isteach sa chomh-aireachta rialaithe. Ag an am céanna, tabhair aird ar na pointí dearaidh seo a leanas:
1. Beidh ciorcad aerála éigean ag an gcomh-aireachta rialaithe leictreachais. Beidh treo sreafa aeir an chuaird aerála gan bhac agus comhlíonfaidh sé prionsabal an stiúrtha sreabhach réidh. Beidh an lucht leanúna atá suiteáilte ar an gcomh-aireachta rialaithe leictreachais níos mó ná 30 50 faoin gcéad níos mó ná aeráil iomlán lucht leanúna an inverter féin.
2. Generally, the air path of the electric control cabinet shall have an air inlet with low wind resistance. In the case of dirty environment, the air inlet shall have a filter screen with small wind resistance and prevent blockage.
3. It is necessary to install the air deflector and wind deflector in the electric control cabinet. The function of the wind deflector is to block the direct air and avoid the return of hot air, so as to improve the air flow direction in the cabinet and improve the cooling effect.
4. The finverter shall be installed at a certain distance from the surrounding electrical appliances and box wall, especially to leave up and down space to make the air duct smooth and make the air flow freely. According to different power, at least 120 300mm space shall be reserved, and the left and right front space shall be at least 50mm.
